Longitudinal straight seam welded pipe butt weld joint cross-sectional shape, depending on the thickness of the body to be welded before welding groove and then type two sides. When welding thick steel plate, for penetration in contact at the edges out of various shapes of the groove, so that more easily into the welding rod or wire. Groove patterns are one-sided welding the welding groove and the sides of the groove. When you select groove type, in addition to outside should be considered to ensure penetration welding convenient, less filler metal Chi, small welding deformation and beveling of Longitudinal low cost factor.

Linker connecting the two is in the welding Longitudinal seam formed called weld. Both sides of the weld in the welding welding heat effect will be, but the organization and performance vary, this area is known as the heat affected zone. Welding due to the workpiece material welding materials, Longitudinal welding current so different, after welding may occur in the weld and heat affected zone of overheating, embrittlement, hardening or softening, but also the weldment performance degradation, deterioration of weldability. This need to adjust the welding conditions, before welding weldment interface preheating, post-weld heat when and weld heat treatment can improve the quality of welding weldment quality.