1, roll standard, roll bar:
1) Rolling machine work, is strictly prohibited by hand touch roll standard roller, to prevent pressure hand; is strictly prohibited by double-roller standard machine to prevent damage to the roller.
2) galvanized pipe running in the conveyor roller in the rolling standard, labeling machine according to different specifications, replace the note, replace the specifications once to adjust the pressure roller height, to always add oil.
3) Roller label machine to regularly check the apron and found cracks to be replaced.
4) The rubber tire should be pressed on the center line of the steel pipe, and the upper and lower fixing bolts of the pressure angle should be adjusted.
5) When printing the sign ring, the two people should roll at the same time, the roller steel pipe should add the ink frequently, but the ink is not easy too much.
2, Packing:
1) The baler uses air compressor gas, the pressure is 0.4-0.8Mpa. In the baler working state to prohibit the hand to touch the baler action parts in order to avoid injury.
2) When you pack the first buckle to wear in the packaging belt, and then wrapped around the pipe, the other end into the buckle, the baler pressure in the packing belt, open the baler air valve for packing buckle. Packed with a thickness of 1.0-1.2mm, packaging with a request from the end of the first 100mm, two 300mm, blue flag should be from the end of the first 400mm.
3) The same specifications of the galvanized tube packaging selection of the same specifications of the packaging rack, the galvanized pipe into hexagonal type, and to achieve a homogeneous.
4) The outer surface of the steel pipe after packaging should be clean with a clean cotton cloth before cleaning on the pile, if the condition of the tube to pipe water control net; does not allow anyone to step on the tube, to keep galvanized pipe appearance quality.
